Info:

An industry leading company that provides engineering services that cater specifically to the electric utility industry is looking for an EIT. Responsibilities: Detailed design of transmission, distribution and/or substation projects, ranging in voltage from 14.4kV to 500kV, which could include bus and equipment arrangements, support structures and insulators, ground grids and grounding studies, station service design and cable systems; Preparing all needed documentation for a project including technical specifications, tender documents, technical reports and project calculations; Working effectively in a team environment; Performing tasks allocated by Senior Project Engineer or Project Manager.

Requirements:

• Advanced oral and written communication skills in English

Qualifications:

• Eligibility for APEGBC registration
• Bachelor’s Degree in Electrical Engineering from an accredited university
• A minimum of 3 years experience in the electric utility or related engineering field
• Ability to analyze electrical problems, interpret and evaluate various technical studies and data, define and develop criteria and cost estimates for plant modifications and/or other major projects
• Knowledge of electrical equipment, bus and equipment arrangements, support structures and insulators, ground grids and grounding studies, station service design, cable systems, and overhead and underground distribution systems would be an asset
• Ability to communicate effectively with various internal and external sources for the purposes of gathering and relaying information, resolving issues of concern, coordinating with clients, etc.
• Experience with Microstation and/or AutoCAD

To Apply:

Contact ISS Multilingual Case Management, 333 Terminal Ave, Room 622
Phone: 604-684-2504 to register for job placement

Info:

An industry leading company that provides engineering services that cater specifically to the electric utility industry is looking for a CAD Technician with Microstation Skills. Responsibilities: Providing detailed drawings for substation, transmission, distribution, and generation projects, ranging in voltages from 25kV to 500kV, using Microstation and AutoCAD, or in manual form; Preparing drawing packages for clients; Managing and organizing drawings including drawing inquiry, receiving, storing, updating status, printing, issuing, etc.; Performing tasks assigned by Lead Drafter, Project Engineer or Project Manager; Reviewing and approving drawings for issuance to customer.

Requirements:

• Advanced oral and written communication skills in English

Qualifications:

• CAD Certificate from a recognized institution.
• A minimum of 5 years of experience in drafting electric utility or related engineering field.
• Working knowledge of Microstation and AutoCAD.
• A strong understanding of electrical design and power systems.
• Familiar with local standards and building codes.
• A team player with strong communication and interpersonal skills.
• Solid organizational and time management skills.
• Excellent attention to detail.
• Ability to work effectively in a fast-paced, high volume, deadline-driven environment

To Apply:

Contact ISS Multilingual Case Management, 333 Terminal Ave, Room 622
Phone: 604-684-2504 to register for job placement
If you are already registered with the ISS Multilingual Case Management, call 604-684-7868 for job placement at Work Resource Centre

Info:

This well known placement agency is currently seeking a Structural Design Engineer for one of their clients. The major portion of a Structural Engineer’s time is spent overseeing the design and analysis of structures, buildings and foundations. Dynamic considerations are frequently involved in dealing with vibratory equipment loads and earthquake forces. The Structural Engineer’s responsibility encompasses all the civil and structural engineering aspects of any project. The engineer is involved in the total project early in its development; from preliminary site feasibility studies and basic design criteria through the actual design of foundations, structures and buildings and coordination with field crew during construction to the point of assuring that the material is delivered to and successfully installed at the job site. Acting as a senior structural engineer, the responsibilities may include supervision and guidance of a group of engineers and designers and the assumption of complete structural responsibility for a part of a project or specific structure(s). Additionally, the senior structural engineer will be expected to prepare construction specifications, design criteria, develop structural concepts and maintain efficient interdisciplinary and client communication.

Requirements:

• Advanced oral and written communication skills in English

Qualifications:

• Candidates will have 7+ years experience in heavy industry, preferably in mining, mineral processing, or heavy industry performing EPC/EPCM projects; PEng certification is an asset; Proficiency in engineering design and analysis of reinforced concrete and structural steel industrial structures, construction methods; Experience leading/supervising an engineering project team; Knowledge of North American building and design codes and standards (NBCC, IBC2003, IBC 2006, ACI, AISC, ASCE 7-05); Effective communication skills and ability to interact with other disciplines, field construction team, supporting geotechnical consultants and clients; Experience using Structural Engineering software such as STAAD, RISA-3D or similar; Degree RequiredYesCity (or Nearest City) VancouverState/ProvinceBritish Columbia/CountryCanada
To Apply:

Contact ISS Multilingual Case Management, 333 Terminal Ave, Room 622
Phone: 604-684-2504 to register for job placement

Info:

This service centre located in Burnaby is looking for full time Electronic Technicians to join their team. Duties to include: Repair brand name electronic appliances such as TV, Stereos, Microwave, etc. Attend site to do installation and hook up for electronic devices according to customers’ requirements. Provide restoration services for insurance companies.

Requirements:

• Intermediate English skills

Qualifications:

• Working experience and knowledge of repairing TV, Stereos, Microwave and etc.
• Willing to update the knowledge of new kinds of electronic products
• Hardworking and is flexible to work weekend overtime when needed

To Apply:

Contact ISS Multilingual Case Management, 333 Terminal Ave, Room 622
Phone: 604-684-2504 to register for job placement
If you are already registered with the ISS Multilingual Case Management, call 604-684-7868 for job placement at Work Resource Centre

Info:

Primary responsibilities include but are not limited to: Strip, tin and solder wires; Drill and tap holes; Crimping lugs on wires and following wiring procedures; Building and interconnecting final assemblies and sub-assemblies using production drawings; Obtaining parts and supplies using proper procedures; Completing paperwork as required and all tasks assigned by supervisor.

Requirements:

• Strong communication skills in English

Qualifications:

• Experience crimping lugs on wires
• Ability to recognize wire type and gauge
• Ability to build and interconnect final assemblies and sub-assemblies using production drawings
• Ability to read and interpret Bills of Materials
• 2 years related experience
• Read and interpret schematics and assembly drawings
• Able to safely operate small hand and power tools
• Ability to lift 40-50 lbs pounds
• Able to work in all phases of assembly
• Knowledge of proper soldering techniques
• Ability to read and interpret travelers and schedules

To Apply:

Contact ISS Multilingual Case Management, 333 Terminal Ave, Room 622
Phone: 604-684-2504 to register for job placement. If you are already registered with the ISS Multilingual Case Management, call 604-684-7868 for job placement at Work Resource Centre

Info:

This pharmaceutical manufacturer in Richmond is seeking a Mechanical Maintenance Technician to join their Maintenance Department. Duties to include: Troubleshoot and perform repairs on production machines; Perform routine preventative maintenance jobs; Perform other maintenance duties such as checking equipment, air systems, documentation of maintenance records etc.

Requirements:

• Chinese with English skills to read manuals or intermediate English skills

Qualifications:

• At least three years’ experience in troubleshooting and repairing production machines
• Knowledge and understanding of Canadian regulatory issues for manufacturing/packaging of pharmaceutical / nutraceutical products would be helpful

To Apply:

Contact ISS Multilingual Case Management, 333 Terminal Ave, Room 622
Phone: 604-684-2504 to register for job placement
If you are already registered with the ISS Multilingual Case Management, call 604-684-7868 for job placement at Work Resource Centre

Info:

This manufacturer of printed circuit board assemblies is looking for two (2) permanent, full time Electro-mechanical assemblers to join their manufacturing operations. Under general guidance with limited supervision, the successful candidates will perform electro-mechanical assembly and other related assembly tasks as assigned. Follow moderately detailed assembly procedures and instructions while performing assigned tasks in compliance with quality workmanship and company standards. Use tools or operate power driven equipment to drill, rivet, insert parts or components, cut and shape components, crimp, connect wires, wire wrap, perform wiring and prepare wires. Wires may include shielded wires, and solder sleeve assemblies, and tasks may include strip, tin, twist and wire identification by tagging. Operate Go / No go test equipment. Work with colour coded materials. Perform washing, degreasing, masking, spraying preparation, unmasking and touch-up operations for conformal coating or other applications. Install or assemble plates, gaskets, grommets, heatsinks, components, sub-assemblies, etc. using fasteners and/or adhesives. Perform basic soldering operations, part marking, lacing, and make cable assemblies or wire harnesses. Operate vacuum chambers, ovens, scales, caulking guns, etc. Mix adhesives, chemical solutions, potting and coating compounds in required precise proportions; clean and maintain containers, applicators and spray equipment in good working order. Operate wave solder and lead-trimming equipment. Report problems and rejections of first-off product to higher level operators or supervisors for correction. Observe all safety procedures and precautions. Perform other related duties as required.

Requirements:

• Upper intermediate English skills

Qualifications:

• Six months to one year of relevant experience
• Willing to learn and adapt to new methods and procedures
• Willing to proactively participate in the decision making process
• Respect the individual rights of all team members, and support the team
• Report on key quality and output data relevant to the team and accept personal accountability to the team

To Apply:

Contact ISS Multilingual Case Management, 333 Terminal Ave, Room 622
Phone: 604-684-2504 to register for job placement
If you are already registered with the ISS Multilingual Case Management, call 604-684-7868 for job placement at Work Resource Centre

Info:

This manufacturer of printed circuit board assemblies is looking for two (2) permanent, full time Precision Assemblers to join their manufacturing operations. Under constant to occasional guidance, the successful candidate will perform precision assembly tasks from simple to difficult in complexity on printed circuit boards, harness, or other electronic assemblies following detailed assembly procedures. Follows manufacturing assembly procedures and instructions, and performs assigned tasks in compliance with quality, workmanship, and company standards. Uses tools or operates power driven equipment to drill, rivet, crimp, connect wires. Operates Go / No go test equipment. Works with color coded materials and documentation. Performs washing and cleaning of electronic components and printed circuit boards. Installs or assembles general electro/mechanical assemblies. Performs soldering/de-soldering operations, including both SMT and PTH touch-up processes, and PTH stuffing as required. Performs component preparation, component marking and labeling using component preparing equipment. Performs masking and unmasking for conformal coating and wave soldering processes. Reports problems/issues and rejections to higher level assembler or supervisor for correction.

Requirements:

• Upper intermediate English skills

Qualifications:

• Previous experience, with very strong hand soldering skills working on SMT/TH or mixed technologies is required
• Knowledge of color codes, electronic component identification and IPC610-C would definitely be helpful
• Experience with SMT rework tools, and knowledge of BGA rework/placement equipment would also be helpful
• Must be willing to learn and adapt to new methods and procedures, be willing to proactively participate in the decision making process, and respect the individual rights of all team members, and support the team for a common goal
• Good eye/hand coordination, attention to detail and strong work ethic required

To Apply:

Contact ISS Multilingual Case Management, 333 Terminal Ave, Room 622
Phone: 604-684-2504 to register for job placement
If you are already registered with the ISS Multilingual Case Management, call 604-684-7868 for job placement at Work Resource Centre