Job Title: Cabinet Maker or Cabinet Maker Apprentice
Term: Full time
Location: Vancouver
Salary: $12.00 to $16.00 per hour

Info:

This fire and flood restoration company located in Vancouver is looking for a Cabinet Maker or a Cabinet Maker Apprentice. Experience working with kitchen cabinets and small hand tools is preferred. Production experience or experience running machinery will be helpful.

Requirements:

• Strong communication skills in English

Qualifications:

• Experience working with kitchen cabinets and small hand tools

To Apply:

Contact ISS Multilingual Case Management, 333 Terminal Ave, Room 622
Phone: 604-684-2504 to register for job placement
If you are already registered with the ISS Multilingual Case Management, call 604-684-7868 for job placement at Work Resource Centre

Term: Full time
Location: Burnaby
Salary: Depending on experience

Info:

This manufacturer of printed circuit board assemblies is looking for one (1) full time Conformal Coating Operator to join their manufacturing operations. The successful applicant will under general guidance to limited supervision, perform conformal coating using various types of conformal coating materials on printed circuit assemblies. In addition, other related tasks such electro-mechanical assembly and wave soldering operations may also be required. Follow manufacturing process instructions and procedures, and perform assigned tasks in compliance with quality workmanship and company standards. Perform washing, degreasing, masking, spraying preparation, unmasking and touch-up operations for conformal coating or other related applications. Mix adhesives, chemical solutions, potting and coating compounds in required precise proportions; clean and maintain containers, applicators and spray room in good working order. Use tools or operate power driven equipment to drill, rivet, insert parts or components, cut and shape components, crimp, connect wires, wire wrap, perform wiring and prepare wires. Operate wave soldering and PCA washing equipment. Observe all required safety procedures and precautions. Perform other duties as required.

Requirements:

• Upper intermediate English skills

Qualifications:

• Six months to one year of relevant experience would be helpful
• Experience with conformal coating or wave soldering processes is helpful but not necessary as long as the applicant is willing to learn as training will be provided
• Completion of Secondary School
• Willing to learn and adapt to new methods and procedures
• Willing to proactively participate in the improvement process
• Respect the individual rights of all team members, and support the team
• Report on key quality and output data relevant to the team, accept personal accountability to the team

To Apply:

Contact ISS Multilingual Case Management, 333 Terminal Ave, Room 622
Phone: 604-684-2504 to register for job placement
If you are already registered with the ISS Multilingual Case Management, call 604-684-7868 for job placement at Work Resource Centre

Term: Full time
Location: Burnaby
Salary: Depending on experience

Info:

This manufacturer of printed circuit board assemblies is looking for two (2) permanent, full time Electro-mechanical assemblers to join their manufacturing operations. Under general guidance with limited supervision, the successful candidates will perform electro-mechanical assembly and other related assembly tasks as assigned. Follow moderately detailed assembly procedures and instructions while performing assigned tasks in compliance with quality workmanship and company standards. Use tools or operate power driven equipment to drill, rivet, insert parts or components, cut and shape components, crimp, connect wires, wire wrap, perform wiring and prepare wires. Wires may include shielded wires, and solder sleeve assemblies, and tasks may include strip, tin, twist and wire identification by tagging. Operate Go / No go test equipment. Work with colour coded materials. Perform washing, degreasing, masking, spraying preparation, unmasking and touch-up operations for conformal coating or other applications. Install or assemble plates, gaskets, grommets, heatsinks, components, sub-assemblies, etc. using fasteners and/or adhesives. Perform basic soldering operations, part marking, lacing, and make cable assemblies or wire harnesses. Operate vacuum chambers, ovens, scales, caulking guns, etc. Mix adhesives, chemical solutions, potting and coating compounds in required precise proportions; clean and maintain containers, applicators and spray equipment in good working order. Operate wave solder and lead-trimming equipment. Report problems and rejections of first-off product to higher level operators or supervisors for correction. Observe all safety procedures and precautions. Perform other related duties as required.

Requirements:

• Upper intermediate English skills

Qualifications:

• Six months to one year of relevant experience
• Willing to learn and adapt to new methods and procedures
• Willing to proactively participate in the decision making process
• Respect the individual rights of all team members, and support the team
• Report on key quality and output data relevant to the team and accept personal accountability to the team

To Apply:

Contact ISS Multilingual Case Management, 333 Terminal Ave, Room 622
Phone: 604-684-2504 to register for job placement
If you are already registered with the ISS Multilingual Case Management, call 604-684-7868 for job placement at Work Resource Centre

Term: Full time
Location: Burnaby
Salary: Depending on experience

Info:

This manufacturer of printed circuit board assemblies is looking for two (2) permanent, full time Precision Assemblers to join their manufacturing operations. Under constant to occasional guidance, the successful candidate will perform precision assembly tasks from simple to difficult in complexity on printed circuit boards, harness, or other electronic assemblies following detailed assembly procedures. Follows manufacturing assembly procedures and instructions, and performs assigned tasks in compliance with quality, workmanship, and company standards. Uses tools or operates power driven equipment to drill, rivet, crimp, connect wires. Operates Go / No go test equipment. Works with color coded materials and documentation. Performs washing and cleaning of electronic components and printed circuit boards. Installs or assembles general electro/mechanical assemblies. Performs soldering/de-soldering operations, including both SMT and PTH touch-up processes, and PTH stuffing as required. Performs component preparation, component marking and labeling using component preparing equipment. Performs masking and unmasking for conformal coating and wave soldering processes. Reports problems/issues and rejections to higher level assembler or supervisor for correction.

Requirements:

• Upper intermediate English skills

Qualifications:

• Previous experience, with very strong hand soldering skills working on SMT/TH or mixed technologies is required
• Knowledge of color codes, electronic component identification and IPC610-C would definitely be helpful
• Experience with SMT rework tools, and knowledge of BGA rework/placement equipment would also be helpful
• Must be willing to learn and adapt to new methods and procedures, be willing to proactively participate in the decision making process, and respect the individual rights of all team members, and support the team for a common goal
• Good eye/hand coordination, attention to detail and strong work ethic required

To Apply:

Contact ISS Multilingual Case Management, 333 Terminal Ave, Room 622
Phone: 604-684-2504 to register for job placement
If you are already registered with the ISS Multilingual Case Management, call 604-684-7868 for job placement at Work Resource Centre

Term: Full Time Contractor
Location: New Westminster
Salary: To be negotiated

Info:

This construction company is looking for a full time Construction Carpenter Contractor. The right candidate should have 3 to 5 years’ construction carpenter experience in exterior finishing.

Requirements:

• Intermediate English skills

Qualifications:

• 3 to 5 years’ construction carpenter experience in exterior finishing

To Apply:

Contact ISS Multilingual Case Management, 333 Terminal Ave, Room 622
Phone: 604-684-2504 to register for job placement
If you are already registered with the ISS Multilingual Case Management, call 604-684-7868 for job placement at Work Resource Centre